德國進口機械密碼鎖-L57使用視頻

2024-11-11

德國進口機械密碼鎖-L57使用視頻德國進口L57系列機械密碼鎖操作指南

密碼鎖有什么特點?  

1. 初始密碼均為0000；

2. 只有擁有密碼的前提下才能設置新的密碼；

3. 密碼鎖開啟或關閉時，數字鍵盤均會自助清零，以保障密碼不會被泄露；

4. 萬用鑰匙能打開設置了任意密碼的鎖，但不能找回密碼；

5. 找回密碼需要通過萬用鑰匙和專用的解碼針。

User Guide of Dial Lock 57

Features of DialLock 57

1. Initial situation: All digits set to “0", lock is open.

2. Set a new password only if you have old one.

3. When the password lock is opened or closed, the numeric keypad will automatically reset to ensure that the password will not be disclosed.

4. Universal key open a lock with an arbitrary password but can not retrieve the password.

5. Retrieving the password requires a universal key and a dedicated decoding pin.

如何初始設置密碼？

請參照如下步驟:

1. 初始密碼為0000；

2. 在數字鍵盤為0000且開鎖的狀態下，按著箭頭指示方向撥動編程開關；設置個人密碼；

3. 用筆記本或移動電話拍照的方式記錄個人密碼，撥動編程開關到初始位置；

4. 關閉密碼鎖，數字鍵盤自動清零；

5. 密碼設置成功。

Setting up the user code

1. Initial situation:All digits set to “0", lock is open.

2. Move the programming switch in direction of the arrow until it engages.

3. Set your personal code. Make a note of your personal code. Move the programming switch to the initial position.

4. Close the lock. Code is scrambled.

5. The personal code is saved.

如何更改密碼？

請參照如下步驟:

1. 用已設置好的密碼開鎖；

2. 在開鎖的狀態下，按著箭頭指示方向撥動編碼開關；

3. 設置新的個人密碼；

4. 用筆記本或移動電話拍照的方式記錄新的個人密碼，撥動編程開關到初始位置；

5. 關閉密碼鎖，數字鍵盤自動清零；

6. 新的密碼設置成功。

Changing the user code

1. Unlock with the password you have set.

2. Set valid user code. Move the programming, switch in direction of the arrow.

3. Set new user code.

4. Make a note of your personal code. Move the programming switch to the initial position.

5. Close the lock. Code is scrambled.

6. Lock is closed and the new personal code is saved.

忘記密碼怎么辦？

請請參照如下步驟:

1. 一般項目組的辦公行政人員留有備用的緊急開鎖鑰匙；

2. 插入萬用鑰匙；

3. 將萬用鑰匙向右旋轉180°，然后將把手向右旋轉180°，鎖就處于開啟狀態；

4. 將把手向左旋轉180°，鎖就處于關閉狀態；

5. 將萬用鑰匙向左旋轉180°，萬用鑰匙可以拔出。

Emergency opening without code-reset

1. General office administrators of the project team keep a spare key for emergency unlock.

2. Insert the emergency key. Available from the building management.

3. Turn the key 180° to the right and then turn the, knob 180° to the right. Lock is open.

4. Turn the knob 180° to the left. Lock is close.

5. Turn the key 180° to the left. Remove the emergency key.

怎樣才能找回原來的密碼？

請參照如下步驟：

1. 用萬用鑰匙開啟密碼鎖；

2. 在密碼鎖后蓋第一個孔位插入解碼針；

3. 輕微地壓住解碼針，同時轉動數字密碼輪，直到你感到解碼針扣進去，記錄數字密碼；

4. 在四個孔位重復上述步驟，記錄四個數字的密碼；

Finding unknown code

1. Unlock the combination lock with the universal key.

2. Insert finder needle in finder hole no. 1.

3. Press slightly down on the finder needle and turn number wheel at the same time until you can feel the finder needle engaging.

4. Make a note of the code given.

5. Repeat the above steps at the four holes and record the password of the four digits.

為什么萬用鑰匙打不開密碼鎖？

為了安全的緣故，每個項目有各自不同編碼的萬用鑰匙。請向供應商確認密碼鎖所應用的項目。

For the sake of security, agents in each project have their own universal keys with different codes. Please confirm with the supplier which project the combination lock is applied for.

更多技術支持，請?jiān)斣?/p>

電話：13924230586

郵箱：info@taval.cn